ATEX PRODUCTS
Home
About
Us
Products
Data
Sheet
Partners
Contact
us
Presentation
Preventive Fire and Explosion Protection
| Preventive Fire and Explosion protection | ATEX provides two types of systems to prevent the potential of an explosion event. By detecting the incipient fire before a deflagration ignition occurs they prevent an explosion from developing. The ATEX CO system increases the reliability of any protections system. When combined with explosion suppression systems they can lower operational and maintenance cost significantly. |
|
 |
CO
Fire Detection & Control Systems ATEX CO Systems can detect the incipient development of a fire by sensing and comparing the inlet and outlet air for CO content. This allows the operator to manually or automatically correct the problem eliminating the explosion potential & lower maintenance costs. |
|
 |
Infra
Red Spark Detection Systems Using GreCon Systems ATEX can provide a custom engineered spark detection system to detect and suppress sparks and burning embers as they travel down ductwork preventing them from entering process equipment and causing an explosion. |
| Explosion Isolation Systems | Isolation systems are required by the National Fire protection Associations standards on Explosion Prevention in hazardous areas. They provide an effective means of stopping the propagation of flame and /or pressure. ATEX provides various explosion isolation systems to stop the spread of an explosion through ductwork, etc. to other areas or process equipment. |
|
 |
ATEX
Quick Sliding Valves AQS Valves provide a positive barrier stopping both flame and pressure from propagating from one process vessel to another |
|
 |
ATEX
Chemical flame Barriers Provide isolation of flame and mitigate the potential of an explosion traveling from one process vessel to another. |
|
 |
Rico
Ventex isolation valves Standard Ventex valves provide isolation of an explosion without electrical activation. Valves are available for even ST3 dust. |
|
 |
Thorwesten
Diverters Explosion diverters provide a cost effective means of mitigating the propagation of an explosion through ductwork. |
| Explosion Venting Systems | ATEX provides explosion venting systems to release the pressure and flame of a deflagration in controlled manner to a safe area. ATEX has systems that can provide explosion venting for process vessels inside and outside of the protected facility. When coupled with the required isolation methods ATEX systems can provide a total systematic approach meeting NFPA standards cost effectively |
|
 |
Rembe
Explosion Vents Three ply (SS/PTF/SS) domed vents are available in various size and pressure rating. Sanitary vents are available for food grade use. |
|
 |
Q-PEX
Flameless Venting Providing a means of venting an explosion within a facility and isolating its propagation to another process vessel or facility area. |
|
 |
Thorwetsen
Explosion Doors Vents doors provide an effective means to handle explosion venting when reusability is a concern and fire mitigation is an advantage. |
|
 |
ATEX
Reflex Explosion Panels Reflex vent panels provide a reliable alternative to standard vents with many size and functional benefits. |
| Explosion Suppression Systems | ATEX provides explosion suppression systems to extinguish the flame from a deflagration and mitigate the associated pressure damaged to the protected area. When the process medium is hazardous to the environment, the process equipment is too far from an outside wall or cannot be protected by the QPEx system then explosion suppression provides the best protection available for your application |
|
 |
ATEX
Analog Sensors Analog sensors provide superior service to standard explosion detectors. The units can be supervised for functionality while standard detectors can only have their wiring supervised. Their rate of explosion rise detection eliminates false releases and provides superior detection. |
|
 |
ATEX
High Rate discharge Containers HRD's provides the first non-pyrotechnic valve. The valve can be tested without the replacement of parts. Standard units require complete activator replacement with an untested unit after each response. The unit has a dual redundant coil valve for reliability. |
|
 |
ATEX Explosion Guard
Hot Water Atomizer Suppressor
|
 |
ATEX
Wiring Cable The cable is suitable for detection and firing circuits. The jacketed cable has 3 conductors shielded with braided metalic and marked " For ATEX Explosion Protection and not to be placed near high voltage cables". |
Copyright©2003 ATEX Explosion Protection L.P. All rights reserved
|
|||||||||